Supergel is Rosco's
premium lighting filter with a range of 129 colours and 16
diffusion filters. This high temperature filter's unique engineering
in having a solid polycarbonate colour substrate sandwiched
between two layers of clear polycarbonate at very high temperatures
gives it an unsurpassed color retention, heat resistance and
extended life. Available in rolls of 61 cm wide by 7.62 m
long.
CalColor
Lighting Filter
Calibrated colour
by Rosco is a series of colour effects lighting filters designed
specifically to the spectral sensitivity of colour film. The
series includes the primary colors Blue, Green and Red, along
with the secondary colors Yellow, Magenta and Cyan followed
by Pink and Lavender. Each color is designed in four densities:
15, 30, 60 and 90, corresponding to the familiar ½, 1, 2 and
3 stop calibrations.
Cinelux
Lighting Filter
Cinelux is a selection
of color filters from the Roscolux range which are produced
in rolls of 48in. x 25ft. (122cm x 7.62m). Cinelux is especially
suited for motion picture and television production where
larger lighting fixtures are often used, or where color is
often mounted on frames in front of lighting fixtures. These
colors have been developed by Rosco over the past 87 years,
and the dyes are among the most heat stable available.
E-Color+
Lighting Filter
Traditional European
colours and correction filters, based on the Cinemoid system.
The range includes a full spectrum of filters for Colour Effects,
Daylight Conversion, Diffusion, Fluorscent Lighting, Neutral
Density, Special Colour Correction, Reflection Material and
Tungsten Correction. The E-Color Plus is the most popular
Rosco lighting filter in the world and are available in sheets
of 53 x 61cm and 53 x 1.22m and rolls of 122 cm wide by 7.62
meters long.
Permacolor
Glass Dichroic Filters
Dichroic filters
are durable glass color filters that transmit only certain
wavelengths of light, reflecting the rest of the spectrum,
rather than absorbing it. Since virtually no energy is absorbed
by the filter, light transmission is significantly higher
than traditional gels and will never burn out or fade. Rosco
Permacolor filters are made with the highest quality coatings
with precise color consistency batch to batch and designed
not to fade or shift color. Permacolor filters are manufactured
in five standard sizes on durable borafloat glass 1.75mm (.069")
thick or can be custom cut in any size up to 13.5" in
diameter.
Compositing
& Chroma-key Products.
Rosco's
high quality DigiComp products are designed to allow seamless
compositing for film, video and digital use. The blue and
green system of paint, fabric and adhesive tape are identically
matched in each format and is ideal for a wide variety of
uses both in the studio and on location.
Rosco' Chroma Key Paints (blue & green) have been formulated
with the assistance of video technicians throughout the world.
They are manufactured to provide the high luminance values
and color saturation for keying effects.
Rosco's Ultimatte Paints have been specifically formulated
to provide the correct luminance and RGB Values for optimum
operation with the Ultimatte compositing system. The color
specifications were designed in conjunction with the Ultimatte
Corporation and have their official approval. Available
as acrylic paints in Ultimatte's Blue, Super Blue and Green.
LitePad
Rosco’s
LitePad™ is a slim profile (8mm thick) LED based light source
that generates a soft even (6000* Kelvin) beam of light and
almost no heat. Its small form factor and light weight make
the Rosco LitePad™ perfect for use in many places where a
larger, typical luminaire could not fit. Drawing just a few
watts of power, the 12v DC LitePad is simple and economical
luminare that comes in 3"x3", 3"x6", 6"x6",
3"x12", 6"x12" and 12"x12" sizes.
The LitePad Kit is available with 2 units of each LightPad
sizes mentioned along with required cables and mounting accessories.
Rosco
Digital - Scenic Backdrops
Rosco Digital can
provide custom backdrops for movie production and television
studios. The new day/night scenic backdrops can be backlit
to provide nightscapes of the same image that is daytime image
when backlight is switched off. High resolution photographs/image
will be required to create custom backdrops. Photography services
can be arranged and archive stock images are also available.
To know more about Rosco's wide range of products for cine,
video and entertainment industries, please visit http://www.rosco.com
Rosco's
high quality DigiComp products are designed to allow seamless
compositing for film, video and digital use. The blue and
green system of paint, fabric and adhesive tape are identically
matched in each format and is ideal for a wide variety of
uses both in the studio and on location.
Rosco’s
LitePad™ is a slim profile (8mm thick) LED based light source
that generates a soft even (6000* Kelvin) beam of light and
almost no heat. Its small form factor and light weight make
the Rosco LitePad™ perfect for use in many places where a
larger, typical luminaire could not fit. Drawing just a few
watts of power, the 12v DC LitePad is simple and economical
luminare that comes in 3"x3", 3"x6", 6"x6",
3"x12", 6"x12" and 12"x12" sizes.
The LitePad Kit is available with 2 units of each LightPad
sizes mentioned along with required cables and mounting accessories.
